Model 5020 Patterned Glazed Membrane Room Door

Frame width is the thickness of the wall on which the door will be mounted. The door frame cannot be more than the wall thickness, but it can be 1-2 cm shorter. Moldings attached to the sides close this difference. You can evaluate the price by selecting the size range in which the width of the case is, or you can specify it when ordering.

It is only the width of the wing part of the door. There is an average of 1 cm protrusions (nails) on the backs of some door wings. When you take the measurement from the part without nails, not from here, the area where the existing door will be installed is removed. While the door is being prepared as a set, it can also be assembled based on the wing size. If you only took the wing size, you must specify it. Otherwise, it is considered as the total width of the door (frame+wing).

Frame sills measure 7cm or 8cm on average. 10cm sills make the door look wider and more imposing. Considering the price difference, you can consider the "wide sill" option.

You can choose if you want handle and accessory included. In the accessories section; There are handles, locks, wicks and hinges. You can supply it yourself if you wish.